Built from a single piece, not glued up from smaller ones
Every shelf is laminated in depth only — never across its width — so the load-bearing span between the legs is one uninterrupted piece of timber, not a joint pretending to be solid. Boards for each rack are chosen from the same piece of timber, so grain and colour match across every tier. Available in oak, ash, cherry, or walnut, each 4cm thick, on 4×4cm legs. No coloring, no stains: just 100% natural hard-wax oil, left in the wood's own colour.
Why wood, honestly
We won't tell you a wooden rack changes how your amplifier sounds on its own — no material does that by itself. What solid hardwood gives you is real: mass, rigidity, and a structure that absorbs vibration internally rather than ringing the way bare steel, aluminium or glass can. Medium-density fibreboard is often praised for its uniform density, but in the world of high-end audio, uniformity can be a liability. MDF is created by binding wood dust with large amounts of chemical resins and glues. These synthetic binders "choke" the material, preventing it from breathing or dissipating energy effectively. Instead of acting as a sink for vibrations, MDF shelves often act as batteries. They store energy from loud passages and release it back into your equipment milliseconds later. This creates the "muddy bass" problem that many enthusiasts struggle to solve. Hardwoods like oak, walnut, and ash possess a chaotic internal grain structure that is far superior at breaking up standing waves. Walnut is often favored for its ability to provide a tighter low end, while cherry can add a subtle sweetness to the higher frequencies. We utilize 100% solid wood construction to ensure that parasitic vibrations are converted into heat rather than reflected back into your audio components. This isn't just about aesthetics; it's about providing a silent platform where your music can breathe.
Built to hold real systems, not just theoretical ones
Every shelf carries an estimated safe load of ≈100kg — calculated conservatively, from the weakest wood we offer and the narrowest shelf depth, with real margin built in. But the number that actually matters is the one we've lived with: we have repeatedly put weighs over 130kg and has on production Reference units, with no sign of stress. That's not a lab estimate.
Choosing your wood
All four species get the same joinery and the same hand finish — the difference is tone and grain, not quality. Walnut for a tighter low end and brighter highs. Cherry for a balanced, neutral warmth. Ash for brightness with dramatic grain. Oak, the most durable and tonally neutral of the four. We've listened to all four before saying any of that — tell us about your system and we'll help you pick.
Available in oak, ash, cherry, or walnut
1 to 6 tiers in 60×40cm, 60×45cm, 60×50cm, 120×40cm, 120×45, 120×50cm footprints (internal width of 50cm or 53cm per space for 120cm models)
4×4cm legs, 4cm-thick shelves
4 stainless steel spikes (26mm tall, 28mm diameter), each isolated from the wood by a 2mm pad, with stainless floor-contact cups underneath
Optional wheels, no extra charge
Estimated safe load: ≈100kg per shelf — and every design is proven well beyond that: at over 130kg, we have repeatedly put weighs over 130kg and has on production Reference units, with no sign of stress.
Ships in 3 weeks for our 6 standard sizes; a fully custom size is built to order in 6–8 weeks — just tell us your dimensions
Every rack is inspected by hand before it leaves the workshop — and yes, we've tested it properly: see above.
Built from a single piece, not glued up from smaller ones
Every shelf is laminated in depth only — never across its width — so the load-bearing span between the legs is one uninterrupted piece of timber, not a joint pretending to be solid. Boards for each rack are chosen from the same piece of timber, so grain and colour match across every tier. Available in oak, ash, cherry, or walnut, each 4cm thick, on 4×4cm legs. No coloring, no stains: just 100% natural hard-wax oil, left in the wood's own colour.
Why wood, honestly
We won't tell you a wooden rack changes how your amplifier sounds on its own — no material does that by itself. What solid hardwood gives you is real: mass, rigidity, and a structure that absorbs vibration internally rather than ringing the way bare steel, aluminium or glass can. Medium-density fibreboard is often praised for its uniform density, but in the world of high-end audio, uniformity can be a liability. MDF is created by binding wood dust with large amounts of chemical resins and glues. These synthetic binders "choke" the material, preventing it from breathing or dissipating energy effectively. Instead of acting as a sink for vibrations, MDF shelves often act as batteries. They store energy from loud passages and release it back into your equipment milliseconds later. This creates the "muddy bass" problem that many enthusiasts struggle to solve. Hardwoods like oak, walnut, and ash possess a chaotic internal grain structure that is far superior at breaking up standing waves. Walnut is often favored for its ability to provide a tighter low end, while cherry can add a subtle sweetness to the higher frequencies. We utilize 100% solid wood construction to ensure that parasitic vibrations are converted into heat rather than reflected back into your audio components. This isn't just about aesthetics; it's about providing a silent platform where your music can breathe.
Built to hold real systems, not just theoretical ones
Every shelf carries an estimated safe load of ≈100kg — calculated conservatively, from the weakest wood we offer and the narrowest shelf depth, with real margin built in. But the number that actually matters is the one we've lived with: we have repeatedly put weighs over 130kg and has on production Reference units, with no sign of stress. That's not a lab estimate.
Choosing your wood
All four species get the same joinery and the same hand finish — the difference is tone and grain, not quality. Walnut for a tighter low end and brighter highs. Cherry for a balanced, neutral warmth. Ash for brightness with dramatic grain. Oak, the most durable and tonally neutral of the four. We've listened to all four before saying any of that — tell us about your system and we'll help you pick.
Available in oak, ash, cherry, or walnut
1 to 6 tiers in 60×40cm, 60×45cm, 60×50cm, 120×40cm, 120×45, 120×50cm footprints (internal width of 50cm or 53cm per space for 120cm models)
4×4cm legs, 4cm-thick shelves
4 stainless steel spikes (26mm tall, 28mm diameter), each isolated from the wood by a 2mm pad, with stainless floor-contact cups underneath
Optional wheels, no extra charge
Estimated safe load: ≈100kg per shelf — and every design is proven well beyond that: at over 130kg, we have repeatedly put weighs over 130kg and has on production Reference units, with no sign of stress.
Ships in 3 weeks for our 6 standard sizes; a fully custom size is built to order in 6–8 weeks — just tell us your dimensions
Every rack is inspected by hand before it leaves the workshop — and yes, we've tested it properly: see above.